On November 7, 1940, the Tacoma Narrows Bridge in the state of Washington broke apart and fell into the water in a wind of about sixty kilometres an hour, four months after it had opened, and the failure was filmed from the shore by a photographer who had come out to watch the bridge move. The deck had twisted from side to side in the days before, and the movement had been noticed by the engineers and treated as a curiosity. The twisting grew. A dog was the only life lost, for the traffic had been stopped.
The bridge had been built to a design that made it slender and cheap, with a thin deck held by a shallow stiffening structure rather than the deep trusses that had been used before. The saving was real. The deck was not strong enough to hold its shape, and the wind that blew along the valley, which was steady and not strong by the standards of the place, set up a twisting motion that the structure could not damp, and the motion grew until the deck tore itself to pieces.
The collapse changed the study of wind on structures. Engineers went back to work on the problem and built wind tunnels in which models of bridges could be tested, and the failure became the case that is taught in every course on the subject, and later long spans, including the replacement bridge at the same site and the bridges of the 1950s and 1960s, were designed with open decks and with shapes that let the wind through. The lesson was applied.
The pieces of the bridge lie at the bottom of the strait, and divers and historians have visited them, and the site is now on a register of historic places. The second bridge was built on the same piers in 1950 and a third beside them in 2007. The failure of 1940 is remembered less for the money lost than for the correction it forced, and the films of the twisting deck are among the most watched pieces of engineering footage.